Replacing A Rear Turn Signal Light Bulb Or A Tail/Brake Light Bulb; Replacing An Auxiliary Light Bulb - Yamaha FJR1300 Owner's Manual

Replacing a rear turn signal
light bulb or a tail/brake light
bulb
1. Remove the passenger seat. (See
page 3-14.)
2. Remove the socket (together with
the bulb) by turning it counter-
clockwise.
1. Turn signal light bulb socket
2. Tail/brake light bulb socket
3. Remove the defective bulb by turn-
ing it counterclockwise.
4. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
5. Install the socket (together with the
bulb) by turning it clockwise.
6. Install the passenger seat.
PERIODIC MAINTENANCE AND MINOR REPAIR
EAU27000
Replacing an auxiliary light
bulb
This model is equipped with two auxil-
iary lights. If an auxiliary light bulb burns
out, replace it as follows.
1. Remove panel B (if replacing the
left auxiliary light bulb) or panel C
(if replacing the right auxiliary light
bulb). (See page 6-5.)
2. Remove the auxiliary light socket
(together with the coupler) by turn-
ing the socket counterclockwise.
1. Auxiliary light bulb socket
2. Auxiliary light lead coupler
3. Remove the defective bulb by pull-
ing it out.
EAU27010
1. Auxiliary light bulb
4. Insert a new bulb into the socket.
5. Install the auxiliary light socket (to-
6-31
gether with the coupler) by push-
ing it in and turning it clockwise.
6