Advanced Operations
Using clerk functions
Enable clerk feature
Please follow the below procedure to enable clerk feature.
PGM
Mode switch
Assigning a clerk
You can assign clerks by using clerk number.
Clerk number key
Clerk sign on
Signing clerk 1 on:
Signing clerk 2 on:
• If you do not want the clerk number to be shown on the display, press
Clerk sign off
Signing clerk off:
(except PGM mode)
• The current clerk is also signed off whenever you set the mode switch to OFF position.
Important!
• The error code "E008" appears on the display whenever you try to perform a registration, a read/
reset operation without signing on.
• The signed on clerk is also identified on the receipt/journal.
48
E
6
6
6
OPERATION
6
6
:
Clerk number
:
OPERATION
Å
6
6
RECEIPT
— Clerk name/machine No./consecutive No.
before entering the number.