Table of Contents
Advertisement
2. Press one of the up and down scrolling buttons until desired option is displayed:
DELAY START
MULTITAB
SETTINGS
3. Press OK / START to confirm and enter submenu.
4. Press up and down scrolling buttons until required submenu is displayed.
5. Press OK / START to confirm.
6. To exit from the menu press OPTION button.
Option menu
DELAY START
MULTITAB
SETTINGS
OK / START button
Press it to:
• confirm / memorize any option,
• start a washing programme.
The OK / START and OPTION buttons if pressed simultaneously can:
• cancel a washing programme in progress,
• cancel the setting of an option.
It is also possible to return to the factory setting for the following options:
Allows the start of the selected washing programme to be delayed for
between 1 and 19 hours. The countdown will decrease with steps of
1 hour. Only in the last hour the decrease is in minutes. Once the
countdown has elapsed the washing programme will start automat-
ically.
Sets the dishwasher for the use of conventional detergents or combi
detergent tablets (3 in 1 - 4 in 1 - 5 in 1 etc...). See MULTITAB function.
– ON: function activated. Use combi detergent tablets. The symbol
appears in the display.
– OFF: function deactivated. Use conventional detergents.
LANGUAGE
Allows you to view messages in the required language.
WATER HARDNESS
Allows you to set electronically the water softener.
RINSE AID
Allows you to activate or deactivate the rinse aid dispenser.
– ON: activated
– OFF: deactivated
SOUND VOLUME
Allows you to adjust the volume of the acoustic signals (from 0 to 5).
Level 0 means the deactivation of the acoustic signals and the corre-
sponding symbol
BRIGHTNESS
Allows you to increase or decrease the brightness of the background
of the display, 10 different levels can be selected.
Factory setting: level 10.
Option submenu
appears in the display.
7
Control panel
Advertisement
Table of Contents
