What To Do If - AEG FM 4360G-an Instruction Book

Aeg ceramic hob
Table of Contents

Advertisement

If the appliance is not working correctly, please carry out the following checks
before contacting your local AEG Service Force Centre.
IMPORTANT: If you call out an engineer to a fault caused by incorrect use or
installation, a charge will be made even if the appliance is under guarantee.
Problems
The product doesn't work.
The gas isn't burning properly.
The electric ignition isn't work-
ing.
When the control knob is
released, the gas goes out again
In-guarantee customers should ensure that the above checks have been made as
the engineer will make a charge if the fault is not a mecanical or electrical brak-
down.
Please note that it will be necessary to provide proof of purchase for any in-guar-
antee service calls.

What to do if...

Remedy
Check that the product has been
turned on. Check the mains elec-
tricity is connected. Check the
fuse for the product.
Check whether the gas has been
turned on. Check whether the gas
bottle is empty.
Check that the burner ring and
covers are correctly positioned.
See the section "How to use
it...Burners"
Check the mains electricity is con-
nected.
Make sure you press the control
knob all the way down, and hold
it in for 10 seconds.
26

Advertisement

Table of Contents
loading

Table of Contents