Audio Setup; System Setup - Clarion CZ500E Owner's Manual & Installation Manual

Audio Setup

Press the [SOUND] button to enter sound
effect setting mode. First press shows current
EQ. Rotate the [VOLUME] knob to change
the options in the following order: OFF →
B-BOOST → IMPACT → EXCITE → CUSTOM
Press the [SOUND] button, then press
[ , ] to select USER preset including:
BALANCE → FADER → M-B EX → LPF(low
pass filter) → SUBW VOL, rotate the
[VOLUME] knob to select a value.

System Setup

In the radio mode, press and hold the [D]
button to enter system MENU. Press the [
] to select options, rotate the [VOLUME]
knob to adjust.
AF: ON/OFF
Rotate the knob to choose AF on or off.
REG: ON/OFF
Rotate the knob to choose REG on or off.
DX/LO
Rotate the knob to choose radio local or
distant.
LO: Only stations with strong signal can be
received.
DX: Stations with strong and weak signals can
be received.
SCRN SVR: ON/OFF
Rotate the knob to choose screen saver on
or off.
SCROLL: ON/OFF
For track information that is longer than the
display panel:
When SCROLL is ON, the LCD will display
ID3 TAG information cyclely, e.g: FILE →
FOLDER → TITLE → ARTIST → ALBUM...
When SCROLL is OFF, the LCD will display
one of the ID3 TAG information, the default is
FILE, but user can adjust it to other ID3 TAG
information by pressing the [DISP] button.
DIMMER: ON/OFF
Rotate the knob to choose dimmer on or off.
ON: The LCD is dimmed when the interior
light is on.
18
BALANCE: LEFT 1-7 → CENTER → RIGHT
1-7
FADER: LEFT 1-7 → CENTER → RIGHT 1-7
M-BEX: ON/OFF
LPF: THROUGH/80/120/160
SUBW VOL: (-6) - (+6)
OFF: The LCD stays at maximum brightness.
,
BEEP: ON/OFF
Rotate the knob to choose button beep sound
on or off.
BT menu
While in BT mode, press and hold the [D]
button to enter BT MENU. Press the [
to select options, rotate the [VOLUME] knob
to adjust.
AUTO CON
Rotate the knob to choose connect
automatically or not.
PIN CODE
Rotate and press the knob to choose a 4-digit
password. Press the knob more than two
seconds to confirm.
, ]