Firmware upgrade
To upgrade the Wireless Router Firmware, launch EtherPAD Explorer from the Multenet
Product CD and select 'Scan' to search for attached Multenet devices.
Highlight the device you would like to upgrade firmware for and select 'Upgrade Firmware'.
EtherPAD Explorer will then prompt you for the file, which should be a '.pak' file, for preforming
the upgrade.
Browse to the directory in which you have stored your firmware and open the file to start the
upgrade. EtherPAD Explorer will show a status bar informing you of the upgrade process. A
pop up box will inform you whether the upgrade was successful once the operation completes.
Upgrading
Upgrading
Wireless Routers
61