Multenet GPRS / EDGE User Manual page 20

Local Date and Time
Date -
Time -
Timezone -
Synchronisation
NTP Server -
Interval -
NTP Time Server
Enable Server -
Note:
For a list of public NTP servers go to www.ntp.org.
You should select the server closest to your location.
Configuration
Date should be entered in the format dd/mm/yyyy.
24h mode time.
Select your Coordinated Universal Time (UTC).
Enter the address of the NTP server you would like to synchronize
with. Network Time Protocol (NTP) provides a solution for the need
to synchronize network devices to an accurate time in a networking
environment. An NTP client synchronizes the time and date with an
NTP server. The NTP server should be a reliable source, such as
a time server on the Internet. A number of free public Internet time
servers are available.
Select the interval at which you would like the Wireless Router to
synchronise with the NTP time server.
Check this box to set up the Wireless Router to act as a NTP server.
This would enable local time synchronisation for your devices with
the Wireless Router.
Wireless Routers
20