Dns (Domain Name Server); Snmp (Simple Network Management Protocol) - Multenet GPRS / EDGE User Manual

DNS (Domain Name Server)

Domain Name Server IP Addresses can be configured here if you wish to use hostnames
instead of IP Addresses, you can use Hostnames (i.e. demo.multenet.com). The DNS must be
reachable for this feature to work successfully. The Gateway IP Address needs to be set if the
Domain Name Servers are located outside the local subnet.

SNMP (Simple Network Management Protocol)

SNMP allows you to monitor the Wireless Router from a SNMP manager. By default, the
SNMP MIB can be read by any manager on the Ethernet network.
You can configure the passwords for SNMP access. Default password for Read-Only access
is 'public'.
Manager Address -
Community String -
Permission
Traps
Configuration
IP Address of the SNMP Manager. To allow connection, from any
SNMP Manager, specify 255.255.255.255.
password to access the SNMP MIB.
- read only Managers can only read values
read/write Managers can also write to MIB variables.
- disabled No traps to be sent to SNMP Managers
snmp v1 v1 type SNMP traps to be sent to configured Manager
snmp v2c v2c type SNMP traps to be sent to configured Manager
Wireless Routers
34