Routing - Multenet GPRS / EDGE User Manual

Routing

Routing provides a tool to create static routes to different networks. If a Ethernet default
gateway is set, the following default route is seen.
Default Route -
Network Address -
Network Mask -
Interface -
Gateway address -
Configuration Configuration
To create a default route over Ethernet, PPP or VPN this box must
be checked
Specify the remote network's address. This will create an IP route to
the remote network.
Specify the remote network's mask. This parameter is only used for
non-default routes.
Select the interface for which this route applies in the drop-down list.
Specify the IP address of the gateway for this route.
Wireless Routers
31