Product Overview (Rear Panel) - Chauvet Stage Designer 50 User Manual

28 Blackout
29 Audio Level Fader
30 Speed Fader
31 Fade Fader
32 Master A_B

Product Overview (rear panel)

1
2
Item Button or Fader
1 3-pin DMX output
connector
2 5-pin DMX output
connector
3 Polarity switch
4 MIDI Thru
5 MIDI Out
6 MIDI In
7 Audio Input
8 Remote Input
9 DC Input
Stage Designer 50
Used to kill all output, with exception of Full On.
Adjusts the audio sensitivity when in Audio trigger mode of scenes
Used to adjust the sped of scenes/chases running
Adjusts the fade-in, fade-out, and cross-fade times
Adjusts overall intensity
4 5
6
7
3
Function
DMX control signal
DMX control signal
Used to select DMX polarity
MIDI port for connecting to a sequencer or MIDI device
MIDI port for connecting to a sequencer or MIDI device
MIDI port for connecting to a sequencer or MIDI device
This jack accepts a line level audio input signal ranging from 100mV to
1Vpp
Blackout and Full On may be controlled by a remote control using a
standard ¼´jack
DC 12-20V, 500mAMin.
9
8
January 31, 2012
9