Setting Midi Out; Receiving Midi File Dump; Sending Midi File Dump - Chauvet Stage Designer 50 User Manual

Setting MIDI OUT

Action ·
1. While holding down the RECORD button,
simultaneously tap Flash button #2 three
times. The display reads MIDI CHANNEL
OUT to indicate channel setup is available.
2. Select the MIDI control channel (1~16) by
tapping Flash buttons 1~16. The relevant
channel LED lights indicating MIDI OUT
channel is set.
3. While holding down RECORD, tap the
REC EXIT button to exit MIDI setting.

Receiving MIDI File Dump

Action ·
1. While holding down the RECORD button,
simultaneously tap Flash button #3 three
times. The display reads MIDI FILEDUMP
RECVING 000% when the device is in the
correct mode.
2. While holding down RECORD, tap the
REC EXIT button to exit MIDI setting.

Sending MIDI File Dump

Action ·
1. While holding down the RECORD button,
simultaneously tap Flash button #4 three
times. The display reads MIDI FILEDUMP
SENDING 000% when the device is in the
correct mode.
2. While holding down RECORD, tap the
REC EXIT button to exit MIDI setting.
Stage Designer 50
¥
Notes
This is the Channel that the controller will transmit
MIDI note commands.
¥
Notes
This is the process of copying your entire show to
another STAGE DESIGNER™ 50. This will not
work with any other device.
This process can take several minutes to
complete.
The controller will automatically begin sending the
FILE DUMP once the mode has been selected.
Therefore, be sure that the other device has
previously been setup to receive the transfer.
During FILE DUMP, all other operations will cease
to function.
If errors or power failure occurs, FILE DUMP will
be interrupted and stop.
¥
Notes
This is the process of copying your entire show to
another STAGE DESIGNER™ 50. This will not
work with any other device.
This process can take several minutes to
complete.
The controller will automatically begin sending the
FILE DUMP once the mode has been selected.
Therefore, be sure that the other device has
previously been setup to receive the transfer.
During FILE DUMP, all other operations will cease
to function.
If errors or power failure occurs, FILE DUMP will
be interrupted and stop.
19 January 31, 2012