Specifications - Audiolab 8000AP User Instructions

12: 8000AP Specifications
Digital Inputs
Frequency 10Hz – 20KHz (±0.2dB)
Response 5Hz – 75KHz (± 3dB)
Distortion < 0.002% (0dBFS @ 1KHz)
(THD) 16bit, Fs= 44.1KHz, B/W 20Hz- 20KHz
Dynamic
> 103dB
Range
Analogue Inputs
0dBu (775mV); Max 3.5V
Input
Unity Gain (1) with Vol. Level at 0dB
Sensitivity
10Hz – 20KHz (±0.2dB)
Frequency
5Hz – 24KHz (± 3dB)
Response
< 0.003% (rel. 2V@1kHz)
Distortion
Bandwidth = 20Hz - 20KHz
(THD)
Dynamic
100dB
Range
5.1 Bypass Input
0dBu (775mV); Max 3.5V
Input
Unity Gain (1) with Vol. Level at 0dB
Sensitivity
10Hz – 20KHz (±0.2dB)
Frequency
5Hz – 100KHz (± 3dB)
Response
Distortion
< 0.001% (rel. 2V@1kHz)
(THD)
Dynamic
> 110dB
Range
Analogue Outputs
Output 0dBu (775mV)
Level Max 3.5V
Volume 90dB to +15dB in 1dB steps ,
Control Channel imbalance < 0.1dB
Video Outputs
HDMI 1.2a compliant
HDMI HDMI 1.3 compatible
Connection Max resolution 1080p
HDCP compatible
Composite 1.5Vp-p , 75 Ω
OSD PAL or NTSC
General
Mains 90 - 100 V /110 - 120 V / 220 - 240V
Voltage (marked on the rear of the unit)
Power 15W Operational
Consumption < 7W Standby
Dimensions
445 mm x 75 mm x 338 mm
overall (WxHxD)
Net: 5.76 Kg
Weight
shipping: 7.38 Kg
Audiolab reserves the right to alter design and specification without notice.
Specification may vary for different countries.
Page 20
Key Features
DSP: Dual DSP , Cirrus Logic CS494003, 24Bit front end /
32Bit Post processing
D/A converters: 24Bit / 192KHz bit-stream
Adjustable D/A filter response
A/D converters: 24Bit / 48KHz bit-stream
Upsampling: 2x (on Digital PCM & HDCD)
Audio Processing Modes:
Dolby Digital
Dolby Digital EX
Dolby Pro Logic II
Dolby Pro Logic IIx
DTS
DTS ES Matrix
DTS ES Discrete
DTS 96/24
DTS NEO:6
PCM Stereo (24bit / 192KHz)
HDCD
2 Ch PCM 24Bit / 192KHz via HDMI
8 Ch. PCM 24Bit / 96KHz via HDMI
5.1 Analogue Bypass
Video:
HDMI max resolution 1080p
OSD (On Screen Display) Composite Video (PAL/NTSC)
Connectivity:
2 HDMI inputs and 1 HDMI output
3 Coaxial Digital SPDIF inputs
4 Optical Digital SPDIF inputs
1 Optical Digital SPDIF output
5 Analogue Inputs via RCA phono connectors
8 Analogue Outputs (7.1) via RCA phono connectors
1 Analogue Tape Output via RCA phono connector
6 Analogue Inputs (5.1 Bypass) via RCA phono connectors
1 OSD (On Screen Display) output (Composite Video)
1 RS232 Communications port
Separate Analogue and Digital Power Supply with 10
Regulated Supplies.