Some countries and US states do not allow the exclusion or All work will be carried out by Audiolab or its authorised agents or limitation of incidental or consequential damages or implied distributors. Any unauthorised repair or modification will void this warranties so the exclusions in the paragraph above may not warranty.
1: Statutory & Safety Information Mains Supply: The mains voltage of Audiolab units is shown on the rear panel. If this does not match the voltage in your area, consult your dealer. The mains supply fuse is on the rear panel. If it has broken, check for any Use only attachments/accessories specified by the manufacturer.
PE29 6EB loudspeaker connections, freshly re-made. be carried out by authorised service England agents. If service is required the Bi-Amplified connection- 8000Q with four 8000M power amplifiers Tel:+44 (0)1480 452561 equipment should be returned, securely Fax: +44 (0)1480 13403...
Never run long signal cables close or parallel to mains cables. Connected in parallel with the input. Use to connect a second power Both the 8000M and the 8000P can be used in conjunction with the 8000S integrated amplifier, either to bi-amplify or to run remote loudspeakers.
Switch power off when making connections 4: Connecting Loudspeakers 8000M - Standard Loudspeaker Connection If you are stacking the 8000M, by convention the Left Channel is the upper connection RIGHT LEFT Pre-Amp Left Output Connecting Loudspeakers Pre-Amp Right Output Switch power off when connecting loudspeakers.