Web Server Menu - Liebert OpenComms Web Card User Manual

Web Server Menu

Web Server Menu
----------------
1: Web Server 'enabled'
2: Change Username/Password
<ESC>: Cancel menu level
Please select a key ?>
Selecting Option "4" from the Main Menu opens the Web Server Menu.
From the Web Server Menu you can enable/disable the Web functionality
of the card and edit the Username/Password, which regulates access to
the Web control and configuration tabs.
Select option "1" to turn the entire Web Server ON or OFF.
NOTE: If you select disabled, the card will be totally inaccessible from the
Web, although it will continue to operate as an SNMP-only agent.
Select option "2" to edit the Username or Password that must both be
entered correctly to control the UPS or to change configuration settings of
the card from the Web.
The factory default User Name is Liebert and the Password is Liebert.
Because this is a well-known username and password, you should
change it as soon as possible. You can also change the Username or
Password from the Web.
From the service terminal, you do not need to know the current Username
of Password to make a change.
NOTE: When changing the Username or Password from the Service Ter-
minal, it is possible to leave either field blank. However, blank fields are
not recommended. Entering a blank User Name will result in the user
name being equal to the last known name. Entering a blank for the pas-
sord will result in a blank password.
If you have made changes, you need to press "Esc" to return to the Main
Menu and then press "x" to exit and save changes.