Active High Beam - Volvo V70 Owner's Manual

Hide thumbs Also See for V70:
Table of Contents

Advertisement

switched on/off simultaneously with the main
21
beam
, see MY CAR (p. 104).
Related information
Active Xenon headlamps* (p. 83)
Active high beam* (p. 81)
Light switches (p. 77)
Headlamps - adjusting headlamp pattern
(p. 88)
Tunnel detection* (p. 80)
Auxiliary lamps must be connected to the electrical system by a workshop. Volvo recommends that you contact an authorised Volvo workshop.
21

Active high beam*

The Active High Beam function detects the
headlamp beams of oncoming traffic or the
rear lights of vehicles in front, and switches
the lighting from main beam to dipped beam.
The lighting returns to main beam when the
incoming light has stopped.
Active high beam - AHB
Active high beam (Active High Beam - AHB) is
a function which uses a camera sensor at the
top edge of the windscreen to detect the
headlamp beams of oncoming traffic or the
rear lights of vehicles in front, and then
switches from main beam to dipped beam.
The function can also take streetlights into
account.
The lighting returns to main beam about a
second after the camera sensor no longer
detects the headlamp beams from oncoming
traffic or the rear lights from vehicles in front.
Activating/deactivating
AHB can be activated when the headlamp
control's knob is in position
that the function has not been deactivated in
the menu system MY CAR), see MY CAR (p.
104).
03 Instruments and controls
Stalk switch and knob for headlamp control in
AUTO position.
The function can start while driving in the
dark when the car's speed is 20 km/h or
higher.
Activate/deactivate AHB by moving the left-
hand stalk switch towards the steering wheel
to the end position and then releasing. Deac-
tivation when main beam is on means that the
lights are reset directly to dipped beam.
Car with analogue combined instrument
panel
(provided
When AHB is activated the
minates in the instrument's information dis-
play.
When main beam is switched on the
symbol also illuminates in the combined
instrument panel.
*
Option/accessory, for more information, see Introduction.
03
symbol illu-
81

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xc70

Table of Contents