Cruise Control* Temporary Deactivation And Standby Mode - Volvo V70 Owner's Manual

07 Driver support
||
•
Hold down the button and release it at
the required speed.
A temporary increase in speed with the accel-
erator pedal, e.g. during overtaking, does not
affect the cruise control setting - the car
returns to the set speed when the accelerator
pedal is released.
NOTE
If any of the Cruise Control buttons are
held depressed for several minutes then it
is blocked and deactivated. To be able to
reactivate Cruise Control, the car must be
stopped and the engine restarted.
Related information
•
Cruise control* (p. 185)
•
Cruise control* temporary deactivation
and standby mode (p. 186)
•
Cruise control* - resume set speed (p.
187)
•
Cruise control* - deactivate (p. 187)
07
Cars with 4-cyl 2.0L engine also allow gear changing.
4
*
186
Option/accessory, for more information, see Introduction.
Cruise control* temporary
deactivation and standby mode
The cruise control (CC – Cruise Control) helps
the driver to maintain an even speed. The
function can be temporarily deactivated and
set in standby mode.
Temporary deactivation - standby mode
To temporarily disengage cruise control and
set it in standby mode:
•
Press the steering wheel button
> The combined instrument panel's mark-
ing (5) and the symbol (6) change colour
from WHITE to GREY.
Automatic standby mode
Cruise control is temporarily disengaged and
set in standby mode if:
•
wheels lose traction
•
the foot brake is used
•
speed falls below approx. 30 km/h
•
the clutch pedal is held depressed for a
short time - however, a few seconds does
not activate standby mode 4
•
the gear selector is moved to neutral
position (automatic gearbox)
•
the driver maintains a speed higher than
the set speed for longer than 1 minute.
The driver must then regulate the speed.
Related information
•
Cruise control* (p. 185)
•
Cruise control* - managing speed (p. 185)
•
Cruise control* - resume set speed (p.
187)
•
Cruise control* - deactivate (p. 187)
.