Volvo V40 Cross Country Owner's Manual page 198

07 Driver support
||
The steering wheel buttons and display in cars
with speed limiter 5 .
To enable cruise control:
•
Press the steering wheel button
> The cruise control symbol (6) in the com-
bined instrument panel for cruise control
active changes from GREY to WHITE and
shows that the cruise control is in
standby mode.
To activate cruise control:
•
At the required speed - press the steering
wheel button or
07
> The current speed is stored in the mem-
ory and the combined instrument panel's
marking (5) illuminates at the selected
speed.
A Volvo dealer has updated information about what applies in each respective market.
5
*
196
Option/accessory, for more information, see Introduction.
NOTE
Cruise Control cannot be enabled at
speeds below 30 km/h.
Changing the speed
•
Adjust with short presses on
every press gives +/- 5 km/h. The last
presses made are stored in the memory.
To adjust +/- 1 km/h:
•
Hold down the button and release it at
the required speed.
A temporary increase in speed with the accel-
erator pedal, e.g. during overtaking, does not
affect the cruise control setting - the car
returns to the set speed when the accelerator
pedal is released.
NOTE
If any of the Cruise Control buttons are
held depressed for several minutes then it
is blocked and deactivated. To be able to
reactivate Cruise Control, the car must be
stopped and the engine restarted.
.
Related information
•
Cruise control* (p. 194)
•
Cruise control* temporary deactivation
and standby mode (p. 197)
•
Cruise control* - resume set speed (p.
198)
•
Cruise control* - deactivate (p. 199)
or -