Volvo V40 Cross Country Owner's Manual page 118

03 Instruments and controls
||
Functions
Digital speed
- km/h
mph
No display
Parking heater *
03
- Direct start
- Timer 1 - leads to the menu for selecting
time.
- Timer 2 - leads to the menu for selecting
time.
Additional heater *
Auto On
–
– Off
TC options
- Distance to empty tank
Fuel consumption
Average speed
- Trip meter T1 and total dist.
T2 and total dist.
- Trip meter
Service status
*
116
Option/accessory, for more information, see Introduction.
Information
Shows the car's speed digitally in the centre of the combined instrument panel:
•
Open with OK, select with the thumbwheel, confirm with OK and go back out with ENTER.
For a description of programming the timer, see Engine block heater and passenger compartment
heater* - timer (p. 141).
For more information, see Additional heater* (p. 143).
Here you can select/activate the options that you want to be available as selectable headings in
the trip computer. The symbols for the items already selected are WHITE with a "tick" - others are
GREY and have no "tick":
1. Open the function with OK, scroll through the symbols for the options with the thumbwheel
and highlight/stop on the desired symbol.
2. Confirm with OK - the symbol changes colour from GREY to WHITE and is marked with a
"tick".
3. Continue to select the function symbols with the thumbwheel or finish with RESET.
Shows the number of months and the distance until the next service.