Keyless* - Key Memory; Keyless* - Lock Settings - Volvo V40 Cross Country Owner's Manual

06 Locks and alarm

Keyless* - key memory

7
The key memory in the remote control
key/PCC means that certain settings in the
car can be individually adapted for different
persons.
The key memory function is available in com-
bination with power seat* and power rearview
and door mirrors. Settings for door mirrors,
driver's seat and steering force can be saved
in the key memory.
Memory function in remote control key
with Keyless function
If several people each with a remote control
key (p. 159) approach the car, then the set-
tings for seat and mirrors are implemented for
the person who opens the driver's door.
After the driver's door has been opened by
person A with remote control key A but
person B with remote control key B shall
drive, the settings can be changed as follows:
06
•
Standing by the driver's door, or sitting
behind the steering wheel person B
presses their remote control key's unlock
button, see Remote control key - function
(p. 162).
•
Select one of three possible memories for
adjusting the power seat (p. 74) with seat
button 1 - 3.
•
Adjust seat and mirrors (p. 97) manually.
Only in combination with power driver's seat and power mirrors.
7
*
172
Option/accessory, for more information, see Introduction.
•
Adjust steering force in the menu system
MY CAR (p. 108).
Related information
•
Keyless* (p. 168)

Keyless* - lock settings

Lock settings for the Keyless-drive function
can be adapted in the MY CAR menu system
Lock settings for the Keyless-drive function
can be adapted by indicating in the menu
system for MY CAR which doors are to be
unlocked, under Car settings
settings Keyless entry
- there select
All doors unlock Any door
between ,
on same side and Both front doors
For a description of the menu system, see
MY CAR (p. 104).
Related information
•
Keyless* (p. 168)
Lock
Doors
,
.