Lamp replacement - side marker
lamps front
The side marker lamp's bulb is fitted inside
the headlamp's smaller cover.
Before starting to replace a bulb, see Lamp
replacement - headlamps (p. 332).
1. Detach the headlamp.
2. Remove the small round cover.
3. Pull the cable in order to withdraw the
bulb holder.
4. Remove the blown bulb and fit a new
one. It can only be installed in one way.
5. Fit the bulb holder in the socket and
press until a clicking sound is heard.
6. Refit the cover. It must be fitted and
pressed in until a clicking sound is heard.
Reinstall the parts in reverse order.
Related information
•
Lamps - specifications (p. 338)
10 Maintenance and service
Lamp replacement - rear lamp
Rear direction indicators, rear fog lamp and
reversing lamp are replaced from inside the
cargo area.
Lamp housing, rear
The bulbs in the rear light cluster are replaced
from inside the cargo area (not the LED
lamps).
1. Remove the covers in the left/right-hand
panel to access the bulbs. The bulbs are
located in separate bulb holders.
2. Press the catches together and pull out
the bulb holder.
3. Replace the bulb.
4. Plug in the connector.
5. Press the bulb holder into place and refit
the cover.
10
335