Key Memory* In Remote Control Key - Volvo S80 Owner's Manual

03 Instruments and controls
||
Preparations
The seats can be adjusted for a certain time
after unlocking the door with the remote con-
trol key without the key in the ignition switch.
Seat adjustment is normally made in key
position I and can always be made when the
engine is running.
Seat with memory function*
03
The memory function stores settings for the
seat and the door mirrors.
Store setting
Memory button
Memory button
Memory button
Button for storing settings
1. Adjust the seat and the door mirrors.
*
70
Option/accessory, for more information, see Introduction.
2. Hold the button depressed to store set-
tings while depressing one of the memory
buttons.
Using a stored setting
Hold one of the memory buttons depressed
until the seat and the door mirrors stop. If you
release the button then the movement of the
seat will stop.
Heated/ventilated seats*
For heated/ventilated seats, see Heated front
seats* (p. 122) and Heated rear seat* (p.
122).
Related information
•
Seats, front (p. 68)
•
Seats, rear (p. 71)

Key memory* in remote control key

All remote control keys can be used by differ-
ent drivers to store the settings for the driver's
17
seat and door mirrors .
Proceed as follows in order to store the set-
tings and use the key memory:
•
Adjust the seat as you want it.
•
Lock the car by pressing the lock button
on the remote control key that you nor-
mally use. This stores the positions of the
seat and door mirrors in the remote con-
18
trol key's memory .
•
Unlock the car (by pressing the unlock
button on the same remote control key)
and open the driver's door. The driver's
seat and door mirrors will automatically
adopt the positions that are stored in the
remote control key's memory (if the seat
has been moved since you locked the
car).
16