5. Press the bulb holder into place and refit
the cover.
Reversing lamp
1. Open the panel in the boot lid.
2. Detach the bulb holder by turning it anti-
clockwise.
3. Remove the blown bulb by pressing it in
and turning anticlockwise.
4. Fit a new bulb, press down and turn
clockwise.
5. Attach the bulb holder by turning it clock-
wise.
Related information
•
Lamp replacement - location of rear
lamps (p. 373)
•
Lamps - specifications (p. 375)
Lamp replacement - location of rear
lamps
The overview shows the location of the lamps
at the rear.
Brake light (LED)
Side marker lamps (LED)
Brake lights (p. 372)
Position/parking lights (LED)
Reversing lamp (p. 372)
Indicator (p. 372)
Fog lamps (p. 372)
Related information
•
Lamp replacement - general (p. 368)
•
Lamps - specifications (p. 375)
10 Maintenance and service
Lamp replacement - number plate
lighting
The number plate lighting is located under the
boot lid handle.
1. Remove the screws with a screwdriver.
2. Carefully detach the whole lamp housing
and withdraw it.
3. Replace the bulb.
4. Refit the whole lamp housing and screw it
into place.
Related information
•
Lamps - specifications (p. 375)
10
373