Moon Phase; Radio Controlled Clock - IROX HBVR761 UV-X User Manual

5e) TEMPERATURE AND HUMIDITY TREND
The trend indicator shows the trend of temperatures and
humidity collected at that particular remote sight.
Three trends: rising, steady, and falling will be shown.
TREND TREND
Arrow
indicator
Temperature
Rising Steady
Humidity Trend
5f) COMFORT LEVEL INDICATORS
The comfort level indicators COM, WET or DRY will tell you
if the current environment is comfortable, too wet or too dry.
The comfort indicators will appear on the display of the main
unit when the following conditions are satisfied:
Indicator Shows that the
Temperature Humidity
displays
Range Range
on the unit Environment
Ideal range for
20˚C to 25˚C 40%RH-
both relative
COM
(68˚F to 77˚F) 70%RH
humidity and
temperature
OVER Contains excess
-5˚C -+ 50˚C
WET
(23˚F - 122˚F) 70%RH moisture
Contains
-5˚C -+ 50˚C Below
DRY inadequate
(23˚F - 122˚F) 40%RH
moisture
Less than
40%RH
No 20˚C (68˚F)
to
No comment
Indicator or More than
70%RH
25˚C (77˚F)
92
7b) CALENDAR CLOCK DISPLAY MODES
The clock and the calendar share the same section of the
display. The calendar is displayed in a day-month format.
Each press on the [MODE] button will change the display
between clock with second, clock with day of week, zone
time with day of week.zone time with second and day-month.
7c) HOW TO SET THE CLOCK MANUALLY
To set the clock manually, hold [MODE] for two seconds
it will show the weekday language. Use [
change it. Press [ MODE ] to confirm. Repeat the same
procedure to set display language, ˚C/˚F, UVI / MED/h, year,
month, date, date-month format, 12/24, hour and minute.
During the setting, press and hold [ ] or [
increase or decrease the value rapidly.
For display language, you can choose among English (En),
German (DE), French (Fr), Italian (IT) and Spanish (SP) -
in that order. If there is an item you do not wish to change,
simply press [ MODE ] to bypass the item.
When you finished the change, press [ MODE ] to exit.
The display will return to the clock mode.
7d) HOW TO SET THE 2. TIME ZONE
To set the 2. time zone, change to the 2. time zone clock
mode and hold [ MODE ] for two seconds. Use [
[ ] to change it from -13h to +15h.
When you finished the change, press [ MODE ] to exit.
The display will return to the 2. time zone clock mode.
7e) DISABLE THE RECEPTION OF
THE RADIO CONTROLLED CLOCK
If you are using this product outside the central European
timezone, you may disable the reception of the radio
controlled clock, Press min. 3 Seconds the key [
disable the automatic time signal reception. The reception
signal [ ] will then disappear from the display.
To re-enable the time signal reception, press again for
min. 3 Seconds the [ ] key.
94

6. MOON PHASE

6a) HOW TO USE AND SCAN THE MOON PHASE
HBVR761 is equipped with a moon phase display and
scanner with which eight moon phases are displayed on the
screen from new moon to waning crescent. The one falls
on the current day will flash on the screen.
TREND
If it is a full moon or new moon day, the icon will flash
faster. The eight phases are:
Falling
New Waning First Waxing
Moon Crescent Quarter Gibbous
To check the moon phase for a particular day, press the
[ ] or [ ] (rear panel) button once. The clock will
enter moon phase scanning mode.
Use the [ ] or [ ] (rear panel) button to locate the date
you want to check. The calendar will be day-driven in this
mode. You can go back 39 days travel to next 39 days. The
Current corresponding moon phase will appear immediately on the
screen. The unit will return to the last display mode when the
[ ] or [ ] (rear panel) buttons are left idle for 2 seconds.

7. RADIO CONTROLLED CLOCK

7a) HOW TO SET THE RADIO
CONTROLLED CLOCK
1. After the batteries are installed. The clock will automatically
search the radio signal. It takes about 3-5 minutes to finish
this process.
2. If user wishs to disable the auto-reception feature, hold
the [ ] button for 2 seconds to disable it.
3. To enable the auto-reception feature again, holds the "Up"
for 2 seconds again to force it receive and allow it receive
at desired time.
4. If the radio signal is received, the date & time will be set
automatically with radio control signal icon [ ] turns on.
5. If the clock fails to receive the time signal, it will be show
as [ ] icon. Then user can set the time manually.
8. BELL / ALARM
8a) HOW TO SET AND ARM THE ALARM
To set an alarm,
1. Press [ALARM] once to display alarm time. If the alarm
is disarmed, the time will be displayed as " OFF ".
2. Hold [ALARM] for two seconds. The hour digits will
blink.
3. Enter the hour using [
4. Press [ALARM]. The minute digits will blink.
] or [ ] to
5. Enter the minutes using [
6. Press [ALARM] to exit.
7. Repeat the same procedure to set single alarm.
] will
8b) HOW TO SET THE ZONE TIME
To set the zone time,
1. Press [MODE] until at zone time display mode,
2. Hold [MODE] for two seconds, the zone time offset
will be displayed.
3. Enter the offset using [
4. Press [MODE] to exit.
The alarm " " "
W S
displayed indicating which alarm is armed. You can also
arm or disarm an alarm by pressing the [
at alarm display mode. Press [MODE] to return to clock
] or
display mode.
8c) SNOOZE FEATURE
When the alarm sound is on, press the snooze key enter
snooze mode. After 8 minutes, alarm sound will be wake
up automatically. The snooze cycle will be restarted if
you press the snooze key again.
If you leave the alarm sound on for 2 minutes, it will enter
] to
snooze mode automatically with maximum 3 times.
8d) HOW TO STOP AN ALARM
Press [ALARM] on the unit to stop an alarm.
Full Waning Last Waning
Moon Gibbous Quarter Crescent
93
] or [ ].
] or [ ].
] or [ ].
" and " Pre-AL" icons will be
],[ ] button
95