Table of Contents
Advertisement
Setup
Step 2: Set Up WiConnect System Transmitter
Note:
The Wi-Q transmitter model is the
must be within 50 feet (15 meters) of the transmitter to be able to receive the wireless signal. Also,
make sure that the same CHANNEL is selected on both the transmitter and the subwoofer.
1.
Do one of the following to connect the transmitter to your audio receiver.
• For Audio Receivers with LFE/SUB Output (most common):
cable. Plug one end of the RCA cable into the
end into the
• For Audio Receivers or Zones without LFE/SUB Output or Connection (less common):
This setup uses one stereo RCA cable. Plug one channel of the RCA cable into the
the transmitter and the
into the
L input
Front
L
Front
Center
Surround
LFE
L
R
+
-
12v
Trigger
L
R
LFE
LFE/SUB connection
2.
Plug the power adapter into the back of the transmitter. Plug
the other end of the adapter into a power outlet.
3.
Make sure the CHANNEL setting on the transmitter matches
the CHANNEL setting on the back of the subwoofer. For
example, choose CHANNEL 2 in both places. You have four
channels to choose from.
L
R
LFE
or
SUB output
on your audio receiver.
R output
on your audio receiver. Plug the other channel of the RCA cable
on the transmitter and the
R
-
+
Power
adaptor jack
TX
1 2 3 4
INPUT
CHANNEL
DC IN
-
+
Figure 3: Transmitter connections
Channel selector
LFE
TX
1 2 3 4
INPUT
CHANNEL
DC IN
-
+
Figure 4: Channel selections
WiConnect System
Transmitter. The Wi-Q subwoofer
This setup requires one RCA
LFE input
on the transmitter and plug the other
L output
on your audio receiver.
L
R
LFE
TX
INPUT
L
Front
Center
Surround
LFE
L
R
+
-
12v
Trigger
Left/Right connection (without LFE/SUB)
9
Wi-Q User's Manual
R input
on
Power
adaptor
1 2 3 4
CHANNEL
jack
DC IN
-
+
Front
R
-
+
Hide quick links:
Advertisement
Table of Contents
