Table of Contents
Advertisement
Setup
Your Wi-Q subwoofer is easy to set up. Once you finish setting up, use the remote control to operate the subwoofer.
Below is an overview of the setup steps. The rest of this section provides details on these steps.
Step 1:
Unpack the box.
Step 2:
Set up the WiConnect System Transmitter.
Step 3:
Mount the WiConnect System Transmitter to the wall (optional).
Step 4:
Set the audio receiver options.
Step 5:
Place and connect the subwoofer.
Step 6:
Run the automatic equalizer.
Step 7:
Set the phase.
Step 1: Unpack Box
1.
Unpack the system using caution when lifting and moving to avoid injury.
2.
Save the carton and packing materials for future use.
Note:
Use this packaging if you ever need to move or ship the subwoofer to Velodyne for service.
Using other packaging may result in severe damage. T o save storage space, flatten the box and
place the other packing material in a plastic bag.
3.
Record the serial number in the space provided on
4.
Make sure you have all the items shown in
retailer where you purchased this subwoofer.
Subwoofer
5.
Make sure you also have an RCA-to-RCA (male-male) cable, so you can
connect the transmitter to your audio system.
Figure
MIC
Power cord
Mic stand
Figure 1: Wi-Q package contents
8
page
28.
1. If any items are missing or damaged, contact the
Transmitter
Power adaptor
Microphone
Figure 2: RCA-to-RCA
Wi-Q User's Manual
Self-tapping
wood screws
EQ
Mute
PWR
Presets
+
1
2
Movies
Rock
Volume
-
3
4
Jazz
Games
Light
0
Night
270
Phase
90
180
Remote
control
Hide quick links:
Advertisement
Table of Contents
