Table of Contents
Related Manuals for Velodyne WiConnect
Summary of Contents for Velodyne WiConnect
- Page 1 USER’S MANUAL Wireless Subwoofer...
- Page 2 Enjoy. Thank you for choosing a Velodyne. Our passion for high performance, low-distortion bass is the driving force behind our worldwide reputation in audio and technical innovation. We are pleased to bring the Velodyne sound experience to your home.
- Page 3 WWW.VelOdyne.cOm WiConnect User’s Manual - i...
-
Page 5: Table Of Contents
Warranty ............17 WWW.VelOdyne.cOm WiConnect User’s Manual - ii... -
Page 7: Place Subwoofer
SET UP Place Subwoofer www.velodyne.com WiConnect User’s Manual - 1... -
Page 8: Subwoofer Placement Guidelines
PlAce THe SUBWOOFeR On THe FlOOR. If the subwoofer is placed on a stand, bracket, tripod, table or similar device, it could fall or be knocked over causing injury to persons or damage to the subwoofer and other items. KeeP THe SUBWOOFeR In ITS UPRIGHT POSITIOn. 2 - WiConnect User’s Manual www.velodyne.com... -
Page 9: Box Contents
Box Contents now that you’ve unpacked the subwoofer, make sure you have the components and Velodyne supplied accessories shown below. Also, acquire the necessary user supplied accessories. If any components or Velodyne supplied accessories are missing or damaged, contact the retailer where you purchased this subwoofer. - Page 10 • Solid Red when in ON/STAND BY. • Subwoofer goes to STAND BY if no audio signal is present for 12 minutes. F. VOLUME: Adjust subwoofer volume. G. POWER: Switch power On and OFF. 4 - WiConnect User’s Manual www.velodyne.com...
-
Page 11: Connect Wireless Transmitter To Receiver
NOTE: The subwoofer must be within 50 feet (15 meters) from its transmitter to be able to receive the wireless signal. Also, make sure that the same cHAnnel is selected on both the transmitter and subwoofer. www.velodyne.com WiConnect User’s Manual - 5... - Page 12 NOTE: The subwoofer must be within 50 feet (15 meters) from its transmitter to be able to receive the wireless signal. Also, make sure that the same cHAnnel is selected on both the transmitter and subwoofer. 6 - WiConnect User’s Manual www.velodyne.com...
-
Page 13: Select Receiver Options Optimal Subwoofer Performance
80 Hz. 5. Go to the connect Subwoofer instructions next. RECEIVER OPTION #3 The receiver has no lFe or SUB output: 1. no selections to make. 2. Go to the connect Subwoofer instructions next. www.velodyne.com WiConnect User’s Manual - 7... -
Page 14: Connect Subwoofer
If the Wic-10 sound is intermittent, check that another wireless device isn’t within 2’ of either the wireless transmitter or the subwoofer. 8 - WiConnect User’s Manual www.velodyne.com... -
Page 15: Adjust Subwoofer Controls For Listening Preferences
In this test, the subwoofer stays in one spot and you move around the room to different listening spots. To do the “Crawl Test”: 1. Place the subwoofer on the floor or table near your most often used seating location. Velodyne doesn’t recommend placing the subwoofer on the actual seating surface. The weight of the subwoofer or its corners could damage the seating surface or structure. -
Page 16: Move Test
In this case, use a different wireless broadcast channel for each system, to avoid the subwoofers from getting input from multiple systems due to the close proximity of the systems. 10 - WiConnect User’s Manual www.velodyne.com... -
Page 17: Use The Subwoofer's Lfe Input (Optional)
• Or use a “Y” connector (notincluded) to connect both the Rand L output channels 3. Go to the Adjust Subwoofer Controls for Listening Preferences instructions next. NOTE: do not use the subwoofer’s lFe connection option if you are already using the wireless connection option. www.velodyne.com WiConnect User’s Manual - 11... -
Page 18: Mount Wireless Transmitter On Wall (Optional)
NOTE: The provided wood screws aren’t suitable for stone or other hard wall surfaces. If you can’t hand drive the screws, you may need to drill holes and provide other wall anchors. Wireless Transmitter Mounting Template 12 - WiConnect User’s Manual www.velodyne.com... -
Page 19: Maintain
The subwoofer was rained on or has become partially or fully submerged in water • The subwoofer does not operate normally or exhibits a marked change in performance • The cabinet has been dropped or is damaged • The subwoofer driver’s cone and/or suspension is physically damaged www.velodyne.com WiConnect User’s Manual - 13... -
Page 20: Troubleshoot
Velodyne for service. To save storage space, you can flatten the box and put the other packing material in a plastic bag. -
Page 21: Resources
Also, plug the unit into a different wall socket. Overloaded sockets or damaged home wiring circuits can cause power voltage drops while the subwoofer is drawing high power levels. This condition can result in the subwoofer shutting down intermittently. www.velodyne.com WiConnect User’s Manual - 15... -
Page 22: Regulatory Information
For further information, contact your local waste disposal service, your local city government office, or the retailer where you purchased this subwoofer. Trademarks The Velodyne logo is a trademark of Velodyne Acoustics, Inc. 16 - WiConnect User’s Manual www.velodyne.com... -
Page 23: Warranty
PROdUcT mOdel: PROdUcT SeRIAl nUmBeR: NOTE: If you need to file a warranty claim for your product, you will still need to submit to Velodyne the original sales invoice or other proof of ownership and date of purchase. Please validate your product warranty by completing the warranty registration online within 30 days at: velodyne.com/warranty-subwoofers... - Page 24 WiConnect-RevB_MAY2012 Velodyne Acoustics, Inc. 408.465.2800 voice Service e-mail: service@velodyne.com 345 digital drive 408.779.9227 fax Product e-mail: help@velodyne.com morgan Hill, cA 95037 408.779.9208 service fax Technical e-mail: techhelp@velodyne.com www.velodyne.com...
Need help?
Do you have a question about the WiConnect and is the answer not in the manual?
Questions and answers