Integrated Peripherals - Gigabyte GA-8S661GXMP User Manual

2-3

Integrated Peripherals

CMOS Setup Utility-Copyright (C) 1984-2005 Award Software
IDE1 Conductor Cable
IDE2 Conductor Cable
On-Chip Primary PCI IDE
On-Chip Secondary PCI IDE
AC97 Audio
Onboard LAN device*
USB Controller
USB Legacy Support
Onboard Serial Port 1
Onboard Serial Port 2
Onboard Parallel Port
Parallel Port Mode
ECP Mode Use DMA
: Move Enter: Select
F5: Previous Values
IDE1 Conductor Cable
Auto
ATA66/100/133
ATA33
IDE2 Conductor Cable
Auto
ATA66/100/133
ATA33
On-Chip Primary PCI IDE
Enabled
Disabled
On-Chip Secondary PCI IDE
Enabled
Disabled
AC97 Audio
Enabled
Disabled
"*" Only for GA-8S661GXMP
GA-8S661GXMP(-C) Motherboard
Integrated Peripherals
[Auto]
[Auto]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Disabled]
[3F8/IRQ4]
[2F8/IRQ3]
[378/IRQ7]
[ECP]
3
+/-/PU/PD: Value
F6: Fail-Safe Defaults
BIOS autodetects IDE1 conductor cable .(Default Value)
Set IDE1 Conductor Cable to ATA66/100/133 (Please make sure your
IDE device and cable are compatible with ATA66/100/133).
Set IDE1 Conductor Cable to ATA33. (Please make sure your IDE
device and cable are compatible with ATA33)
BIOS autodetects IDE2 conductor cable. (Default Value)
Set IDE2 Conductor Cable to ATA66/100/133. (Please make sure your
IDE device and cable are compatible with ATA66/100/133)
Set IDE2 Conductor Cable to ATA33. (Please make sure your IDE
device and cable are compatible with ATA33)
Enable onboard 1st channel IDE port. (Default value)
Disable onboard 1st channel IDE port.
Enable onboard 2nd channel IDE port. (Default value)
Disable onboard 2nd channel IDE port.
Enable AC97 audio function. (Default value)
Disable AC97 audio function.
- 34 -
Item Help
Menu Level
[Auto]
Auto-detect IDE
cable type
[ATA 66/100/133]
Set Conductor Cable
to ATA66/100/133 (80
Pins)
[ATA33]
Set Conductor Cable
ATA33 (40 Pins)
F10: Save ESC: Exit
F7: Optimized Defaults
F1: General Help