Preparation; I Programmable Function Keys - Icom IC-F1700 Operating Manual

I Programmable function keys

The following functions for MDC 1200 system operation can
be assigned to the programmable function keys;
IC-F70 series : [EMERGENCY],
[MONITOR], [P0], [P1], [P2] and [P3]
IC-F1700 series : [UP]*, [DOWN]*, [P0], [P1], [P2], [P3] and
[P4]
*IC-F1810, IC-F1821/D, IC-F2810 and IC-F2821/D only
Consult your Icom dealer or system operator for details con-
cerning your transceivers programming.
If the programmable function names are bracketed in the fol-
lowing explanations, the specific key is used to activate the
function depends on the programming.
MDC CALL KEY
"MDC" is displayed on the key indicator. (IC-F70 series only)
➥ Push to enter the MDC menu selection mode. Then select
the desired MDC menu from "SELCALL," "CALALERT,"
"STUN," "REVIVE," "RADIOCHK," "STATUS" and "MSG"
using [CH Up], [CH Down], [MDC Up] or [MDC Down].
After selection, push this key again to enter the transceiver
alias or message channel selection mode.
➥ While in the transceiver alias or message channel selec-
tion mode, push to return to the MDC menu selection
mode.
MDC UP AND DOWN KEYS
"
only)
[UP], [DOWN],
➥ Push to select the MDC menu after entering the MD menu
➥ Push to select the desired transceiver alias or message
MDC SELCALL KEY
"SELC" is displayed on the key indicator. (IC-F70 series only)
Push to enter the transceiver alias selection mode.
• After the desired alias selection, push [PTT] to transmit a SelCall.
MDC CALLALERT KEY
"CALA" is displayed on the key indicator. (IC-F70 series only)
Push to enter the transceiver alias selection mode.
• After the desired alias selection, push [PTT] to transmit a CallAlert.

PREPARATION

" or " " is displayed on the key indicator. (IC-F70 series
selection mode.
channel while in the transceiver alias or message channel
selection mode.
1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
1