Advertisement
PRECAUTIONS FOR DISCS
HANDLING DISC
- To keep the disc clean, do not touch the play sides of the disc.
- Do not attach paper or ape to the disc.
- Keep the disc away from direct sunlight or heat sources.
- Store the disc in a disc case after playback.
CLEANING DISC
- Before playback, wipe the disc outwards from the center with clean cloth.
- Do not use any type of solvent such as thinner, done by qualified service personnel.
PLACEMENT
- Put the unit where ventilation is good enough to prevent overheating.
- Never put the unit in direct sunlight or near heat sources.
- Put the unit horizontally, never put any heavy object on the unit.
- To protect the pickup, do not put the unit where there is much dust. If there is dust on the pickup, use a cleaning disc to clean it.
- Refer to the operation instructions of the cleaning disc you bought.
LISTEN TO THE CD
1.
Press CD Button(19), "
" is displayed(1),
2.
Insert the disc( Label side up) to the CD Compartment(21 & 22), the total number of track and the total playing time are
displayed(1).
3.
Press
CD PLAY/PAUSE Button(3) to start playing and adjust the volume level(17).
4.
Select your favorite music mode FLAT-CLASSIC-ROCK-POP by pressing EQ Button(11).
5.
Select the BASS BOOST "ON" or "OFF" by pressing X-BASS Button (12). And the BASS BOOST status will indicate by X-BASS
LED & show by LCD display for few seconds.
NOTE : Use also
CD PLAY/PAUSE Button(3) to suspend momentarily the playing track. The current track number and the
running time blinks on the display(1), and press
6. To stop listening the CD, press
CD STOP Button(4), then press
mode and the time is displayed.
OTHER CD PLAYER FUNCTIONS :
SKIP/FAST SEARCH
Button(10) : press
tracks. Press
Button to return to the beginning of the track, or press repeatedly to skip backward several tracks at CD
playing mode. Press and hold the
or
button to search quickly within a track.
REPEAT Button(8) :
A single Track or whole CD can be repeated as any time as you like.
a) Press once to repeat your select track, the display (1) shows REPEAT.
b) Press twice to play the disc continuously, REPEAT on display blinks.
c) Press again to switch off this function.
MIX Button(7 ) : Press to play randomly all the track of the disc, the MIX and the selected track number are displayed(1).
Press again switch off this function.
PROGRAM Button(9) :
To select your own musical program.
a) Insert the disc(21 & 22). The total number of tracks and the total playing time are displayed(1).
b) Press PROG. Button(9), the display shows "
c) Select with
SKIP/FAST SEARCH
Button(9) to store your program in memory.
d) Redo this operation as many times as necessary. 20 tracks can memorised.
e) Press
CD PLAY/PAUSE Button(3) to start playing and the PROGRAM Indicator will light up.
f)
To cancel this function, press
function is cancelled.
NOTE : Normally when playing CD, the CD running time is displayed on the LCD Display (1). It can be changed to show disc
remain time by pressing CD Button(19) at normally played.
again to resume play.
STANDBY Button(18). It will return to Standby
Button to skip forward to the next track or repeatedly to skip several
'', and "PROGRAM" on display blinks.
Button(10) your desired track, then press PROG.
CD STOP Button(4) to stop the disc and press stop again Program
-GB- 9 -
AUXILIARY INPUT
This product can receive audio signals from other devices, such as TV, VCR, DVD player, tuner. To listen to such output,
1.
Connect one end of a RCA plug signal wire (not included) into AUX IN jack (24),
2.
Connect the other end of wire to your home equipment,
3.
Press AUX Button(6), the 'AUX' and time display (1).
4.
Play your home equipment.
5.
Adjust the volume level by pressing and holding VOLUME
6.
Select your favorite music mode FLAT-CLASSIC-ROCK-POP by pressing EQ Button(11).
7.
Select the BASS BOOST "ON" or "OFF" by pressing X-BASS Button (12). And the BASS BOOST status will indicate by X-BASS
LED & show by LCD display for few seconds.
8.
Stop listening auxiliary input, press
STANDBY Button(18) to turn it on Standby mode and the time is displayed.
TIMER FUNCTION AND SET
1.
Press
STANDBY Button(18) to turn on the unit,
2.
Press CLOCK Button(14) twice, then display show "
hour digital will blinks.
3.
Press SET / MEMO Button(9) to store your desired time and the display(1) will return to the last mode played.
4.
Press CLOCK Button(14) three times, display become "
Button(10) to adjust the TIMER OFF time, press SET / MEMO Button(9) to store your desired time.
5.
Press TIMER ON/OFF Button(15), the TIMER indicator displayed
6.
Press
STANDBY Button(18) to return to standby mode.
7.
When reaching the preset timer on time, the unit will be turned on in the last mode played, except in Auxiliary mode will
change to tuner mode automatically.
8.
And reaching the preset Timer Off time, the unit will turn off automatically.
9.
Cancel this function, press TIMER ON/OFF Button(15) again and the Timer indicator will go off.
NOTE : When the power supply was interrupted, the tuner preset station, time and timer will be erased, and the time will blink
on the LCD Display. So you need to set the information again.
SLEEP FUNCTION
1.
Press
STANDBY Button(18) to turn on the unit,
2.
Select your desired function mode(6 or 16 or 19), volume level(17) and music mode(11).
3.
Press CLOCK Button(14) four times, then display become "
SKIP/FAST SEARCH
Button(10) to adjust the sleep countdown time, press once will skip 10 minutes(90 minutes
is the maximum). Press SET / MEMO Button(9) to store your desired. "
time displayed and it starts the countdown.
4.
The unit will turn off when countdown time is reached.
5.
To stop this function, press CLOCK Button(14) to "
SKIP/FAST SEARCH
Button(10) to adjust the sleep time to "
and the unit will play continually.
/
Button(17).
" and TIMER blinks, press SET / MEMO Button(9) the
", press
TUNING
/
SKIP/FAST SEARCH
", press
TUNING
/
" and your desired countdown
" mode, press
TUNING
/
", then press SET / MEMO Button(9),
-GB- 10 -
Advertisement
