CHANNELS AND DIGITAL VALUES
CHANNEL 1
PAN (X)
CHANNEL 2
TILT(Y)
CHANNEL 3
GOBO
0-5
Black out
6-15
Dimming
16-223
Gobo Rotation and Gobo Selection
224-239
Gobo Scroll in steps
240-255
Strobe Speed (Shutter) 7 Speeds
CHANNEL 4
COLOR
0-143
Mixed Colors
144-239
Incremental Color Change
240-255
Rainbow Color Change (7 Speeds)
DMX OPERATION MODE
To set the fixtures in DMX Mode make certain all units are connected to the provided DMX controller or any standard DMX
512 controller using the provided 3-Pin XLR cable.
Turn OFF DIP switch #1 and set the binary DMX address.
DIP #12 Swap Pan Tilt Channels When ON
DIP #13 Inverts Pan When ON
DIP #14 Inverts Tilt When ON
UNDERSTANDING DMX 512
SOUND MODE
Master Fixture: Flip DIP Switch #11 to "ON", DIP Switch #10 to "ON" for SOUND. Then flip DIP Switch #1 through #6 to run
the six built-in programs. For example, DIP Switch #2, #4, to "ON", Program Two and Four will run. To Slave fixture, turn
#11 to "OFF."
NOTES:
When in Master/Slave mode, follow the table below: