Safety Equipment And Labels; Specifications; Warning - Shindaiwa DH235 Owner's/Operator's Manual

Safety Equipment and Labels

ON-OFF
Switch
Throttle Interlock
Caution, Danger, Warning, and Operation Information Labels:
Make sure all information labels are undamaged and readable.
Immediately replace damaged or missing information labels. New
labels are available from your local authorized Shindaiwa dealer.
Figure 2

Specifications

Model
Engine Type
Engine Bore x Stroke
Engine Displacement
Unit Weight, Less Fuel
Unit Dimensions (LxWxH)
Fuel Tank Capacity
Fuel/oil ratio
Carburetor
Ignition
Spark Plug
Electrode Gap
Torque
Air Cleaner
Muffler Type
Starting Method
Stopping Method
Blade Length
Cutting Length
Blade Type
Clutch Type
Gear Type
Gear Lubrication
Standard Equipment
Engine Speed
Clutch Engagement Speed
Wide Open Throttle Speed (W.O.T.)
Specifications are subject to change without notice.
Blade Cover
Protector
IMPORTANT!
Throttle handle with integral controls, anti-vibe mountings , support handle with guard, spark plug
Caution Label
DH235
2-cycle, horizontal cylinder, air cooled
32.2mm x 26mm (1.27 x 1.02 in)
21.2cc (1.29 in
4.97 kg (11.0 lb)
1194 x 272 x 195 mm (47.0 x 10.7 x 7.7 in)
0.37 liter/ 12.5 oz.
50:1 with *ISO-L-EGD or JASO FD class engine Oil
Diaphragm type
Fully electronic, CDI controlled
NGK BPM8Y
0.6 mm/ 0.024 in.
16.7 - 18.6 N∙m / 148-165 in • lbf
Dry element
Spark arrestor muffler or spark arrestor muffler with catalyst
Recoil type
Slide switch,grounding type
710 mm (27.9 in)
624 mm (24.5 in)
Double-blade cutting action: double edged blade
Centrifugal clutch, dry-type
Spur gears
Lithium-based grease
wrench and blade cover
3,300 RPM
4,700 RPM
10,850 RPM
)
3
5