Advertisement
Quick Links
Models
P57 & P57-0011
Updated 7/07
Contents:
Installation Instructions:
Pump Specifications:
Exploded View:
Parts List / Kits:
Torque Specifications:
Trouble Shooting:
Pump Mounting Selection Guide:
Recommended Maintenance Schedule:
Repair Instructions:
Dimensions:
Warranty Information:
Triplex Ceramic
Plunger Pump
Operating Instructions/
Repair and Service
Manual
page 2
page 3
page 4
page 5
page 5
page 6
page 6
page 6
page 7
back page
back page
Advertisement
Related Manuals for Giant P57
Summary of Contents for Giant P57
- Page 1 Models P57 & P57-0011 Updated 7/07 Contents: Installation Instructions: Pump Specifications: Exploded View: Parts List / Kits: Torque Specifications: Trouble Shooting: Pump Mounting Selection Guide: Recommended Maintenance Schedule: Repair Instructions: Dimensions: Warranty Information: Triplex Ceramic Plunger Pump Operating Instructions/ Repair and Service...
-
Page 2: Installation Instructions
1. Prior to initial operation, add oil to the crankcase so that oil level is between the two lines on the oil dipstick. DO NOT OVERFILL. Use Giant 20W-50 oil (p/n 01153) or use SAE 80-90W Industrial Gear Lube oil (p/n 01154),... - Page 3 Select GPM required, then select appropriate motor and pump pulley from the same line. The desired pressure is achieved by selecting the correct nozzle size that corresponds with the pump GPM. P57 PULLEY SELECTION & HORSEPOWER REQUIREMENTS PUMP PULLEY 7.75" 7.75"...
- Page 4 Exploded View - P57 & P57-0011...
- Page 5 Valve Assembly Kit #09315 (P57) Qty. Item Part # 07907 07906-0010 07491 07849 07853 07212 Qty. 07214 07913 Oil Seal Kit #09314 (P57 & P57-0011) Item Part # 13403 08026 Description Screw with Washer Plug, Inlet Plug, Discharge Nut, Stud DESCRIPTION 12226 Manifold...
-
Page 6: Pump Mounting Selection Guide
Re-size discharge plumbing to flow rate of pump Replace plungers Adjust or Replace packing seals Reduce suction vacuum Replace plungers Reduce inlet pressure Giant oil is recommended Adjust oil level to proper amount Daily Weekly 50hrs Every 500 hrs Recommended Spare Parts... - Page 7 7. Replace the back cover (3) o-ring (4), manifold (29) and its contents. Tighten the nuts (46) to 35 ft-lbs (47.5 NM). 8. Make sue Fill the crankcase (1) with the proper amount of oil. NOTE: Contact Giant Industries for Service School Information. Phone: (419)-531-4600 CAUTION...
- Page 8 A Returned Goods Authorization (R.G.A.) number and completed warranty evaluation form is required prior to the return to Giant Industries of all products under warranty consideration. Call (419)-531-4600 or fax (419)-531-6836 to obtain an R.G.A. number.
Need help?
Do you have a question about the P57 and is the answer not in the manual?
Questions and answers