Advertisement
K181X70
min 470
min 650
PLEASE NOTE the difference in maximum heights between the 'direct duct to
atmosphere' installation and the 'recirculation' installation. The recirculation
installation's maximum height is 1190mm due to the active recirculation vents necessarily
being exposed on each side of the chimney. The 'direct duct to atmosphere' installation
shows the now redundant recirculation vents being concealed by the lower chimney by
reversing — that is, turning the upper chimney piece 180 degrees on the vertical.
If a higher chimney height is required for the 'direct duct to atmosphere' installation, that
is, up to 1190mm, simply follow the 'recirculation' installation and have the recirculation
vents exposed, though redundant.
NB: drawings are not to scale — they are to assist only
WARNING: technical specifications and product sizes can be varied by the manufacturer,
without notice. Cutouts for appliances should only be by physical product measurements.
The above information is indicative only.
smeg wallmount rangehood, 70cm
97
150
electricity supply
240 volt, 50 Hz
electrical
1.5 metre connected power cord for
connection
plugging to standard 10 amp GPO
wattage
190 watt motor, 2 x 20 watt halogen globes,
230 watts total
current
0.96 amps
packaged
810mm x 470mm x 630mm = 0.24m³
dimensions
gross weight
20.45kg
net weight
17.50 kg
supplied
• instructions for installation, operation,
maintenance
• one-way butterfly valve for optional
fitment to air exit aperture
• fixing screws
• 150mm/125mm diameter ducting adaptor
• recirculation diverter kit
NB:
— direct ducting to atmosphere requires
150mm diameter ducting
— recirculation to kitchen requires 125mm
diameter ducting
option
activated charcoal filter for optional fitment
in recirculation installation, part number
08999802
SPEED
net air capacity m
pressure mm H20
input wattage
noise dBA
chimney plan detail
1
2
/hr
205 310
3
12
25
45
85
29
34
253
ID120310
Code K181X70
3
590
39
190
50
Advertisement
