Flue System - Ferroli OPTIMAX HE PLUS 18 S Instructions For Use, Installation And Maintenance

OPTIMAX "Y" Plan
Remove
Link
between
terminals 5-6

2.6 Flue system

The unit is "type C" with a sealed chamber and forced draught, the air inlet and flue outlet must be
connected to one of the following flue systems. With the aid of the tables and methods of calculation indi-
cated, before commencing installation, it is first necessary to check that the flue system does not exceed
the maximum permissible length. The current standards and local regulations must be observed.
It should be noted that only Ferroli flue system and accessories should be used on this appliance,
as per BS 5440 2000 and C.E. test certification.
16
OPTIMAX HE PLUS 18 S
Pipe layout
Wiring diagram
Cod. 3540L826 - 04/2009 (Rev. 00)
fig. 16a
fig. 16b