[Gamma]; [Sharpness]; [Noise Reduction]; [Iris] - Panasonic PT-EZ770Z Operating Instructions Manual

Note
f When a name is changed, display of [USER] is also changed.

[GAMMA]

You can adjust contrast balance.
1) Press as to select [GAMMA].
2) Press qw or the <ENTER> button.
f The [GAMMA] individual adjustment screen is displayed.
3) Press qw to adjust the level.
Operation
Press w.
Press q.

[SHARPNESS]

You can adjust the sharpness of the projected image.
1) Press as to select [SHARPNESS].
2) Press qw or the <ENTER> button.
f The [SHARPNESS] individual adjustment screen is displayed.
3) Press qw to adjust the level.
Operation
Press the w button.
Press the q button.
Note
f If you press w while the adjustment value is [+15], the value will become [0]. If you press q while the adjustment value is [0], the value will
become [+15].

[NOISE REDUCTION]

You can reduce noises when the input image is degraded and noise is occurring in the image signal.
1) Press as to select [NOISE REDUCTION].
2) Press qw or the <ENTER> button.
f The [NOISE REDUCTION] individual adjustment screen is displayed.
3) Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
[1]
[2]
[3]
Attention
f When this is set for an input signal with less noise, the image may look different from what it originally was. In such a case, set it to [OFF].

[IRIS]

Aperture correction is performed automatically based on the image to result in an image of optimum contrast.
1) Press as to select [IRIS].
2) Press qw or the <ENTER> button.
f The [IRIS] individual adjustment screen is displayed.
Chapter 4 Settings — [PICTURE] menu
Adjustment
The midtones become brighter.
The midtones become darker.
Adjustment
Contours become sharper.
Contours become softer.
No correction.
Slightly corrects the noise.
Moderately corrects the noise.
Strongly corrects the noise.
Range of adjustment
-8 - +7
Range of adjustment
0 - +15
ENGLISH - 67