Using The Digital Zoom Function; Switching The Aspect Ratio Of The Image; Using The P In P Function - Panasonic PT-EZ770Z Operating Instructions Manual

Chapter 3 Basic Operations — Operating with the remote control
2) Press the <KEYSTONE> button again.
f The other individual adjustment screen is displayed.
When the [KEYSTONE] individual adjustment screen is displayed in Step 1), the [CORNER CORRECTION] individual adjustment
screen ([UPPER LEFT]) is displayed.
Note
f After the individual adjustment screen of [KEYSTONE] or [CORNER CORRECTION] is displayed, press asqw to adjust the keystone
distortion.
f Either setting of [KEYSTONE] or [CORNER CORRECTION] is enabled. If the other item is adjusted after [KEYSTONE] or [CORNER
CORRECTION] was adjusted, the previous setting value will be reset.
f If the <ENTER> button is pressed while the [CORNER CORRECTION] individual adjustment screen is displayed, the individual adjustment
screen for the next corner is displayed.
f Refer to the [POSITION] menu → [KEYSTONE] (x page 72) for details.

Using the digital zoom function

The [DIGITAL ZOOM] menu can be displayed.
You can enlarge images.
button
1) Press the <D.ZOOM> button.
f The [DIGITAL ZOOM] screen is displayed.
2) Press qw to adjust the magnification.
3) Press the <ENTER> button.
4) Press asqw to move the zoom position.
Note
f Refer to the [DISPLAY OPTION] menu → [DIGITAL ZOOM] (x page 86) for details.

Switching the aspect ratio of the image

You can switch aspect ratios according to the input signal.
button
1) Press the <ASPECT> button.
f The setting will change each time you press the button.
Note
f Refer to the [POSITION] menu → [ASPECT] (x page 70) for details.

Using the P IN P function

Locate a separate, small sub screen in the main screen to project two images simultaneously.
button
1) Press the <P IN P> button.
f The setting will change each time you press the button.
Note
f Refer to the menu [P IN P] menu (x page 100) for details.
56 - ENGLISH