Panasonic PT-EZ770Z Operating Instructions Manual page 121

[Authentication set up] page
Set the authentication items when POP authentication or SMTP authentication is necessary to send an E-mail.
Click [Detailed set up] → [Authentication set up].
1 [Auth]
Selects the authentication method specified by your Internet
service provider.
2 [SMTP Auth]
Set when the SMTP authentication is selected.
3 [POP Server name]
Enter the POP server name.
Allowed characters:
Alphanumerics (A - Z, a - z, 0 - 9)
Minus sign (-) and period (.)
4 [User name]
Enter the user name for the POP server or the SMTP server.
[ECO management set up] page
Settings related to the ECO management function of the projector can be made.
Click [Detailed set up] → [ECO management set up].
1 [LAMP POWER]
Selects the [LAMP POWER] setting.
2 [AUTO POWER SAVE]
Set to [ON] when setting [AMBIENT LIGHT DETECTION],
[SIGNAL DETECTION] and [SHUTTER DETECTION].
3 [AMBIENT LIGHT DETECTION]
Selects enable ([ON])/disable ([OFF]) of the environmental
luminance interlock function.
4 [SIGNAL DETECTION]
Selects enable ([ON])/disable ([OFF]) of the no signal interlock
function.
Note
f For details of each setting item, refer to the [PROJECTOR SETUP] menu → [ECO MANAGEMENT] (x page 89) on the projector.
Chapter 4 Settings — [NETWORK] menu
1
2
3
4
5
6
7
8
5 [Password]
Enter the password for the POP server or the SMTP server.
6 [SMTP server port]
Enter the port number of the SMTP server.
(Normally 25)
7 [POP server port]
Enter the port number of the POP server.
(Normally 110)
8 [Submit]
Updates the settings.
1
2
3
4
5
6
7
5 [SHUTTER DETECTION]
Selects enable ([ON])/disable ([OFF]) of the shutter interlock
function.
6 [NO SIGNAL SHUT-OFF]
When the No signal shut-off function is used, select the time
until the standby mode is entered.
7 [Submit]
Updates the settings.
ENGLISH - 121