Control - Panasonic BT-4LH310P Operating Instructions Manual

Main Menu
(Continued)

CONTROL

Submenu
CONTROL
LOCAL ENABLE
*
1
GPI
RS-485 ID SETUP
*
1
This is only available when [CONTROL] is [REMOTE].
„ GPI related
Submenu
GPI CONTROL DISABLE
ENABLE
GPI1 to GPI8 UNDEF
INPUT SDI
INPUT DisplayPort DUAL
INPUT DisplayPort SINGLE
INPUT HDMI DUAL
INPUT HDMI SINGLE
INPUT INT-SG
R-TALLY
G-TALLY
MONO
48
Setting
LOCAL Selects operation. (With control lock)
REMOTE [LOCAL]
[REMOTE] Enables remote operation (control using RS-232C or RS-485; the
DISABLE Selects whether to enable or disable the <INPUT SELECT> and <FUNCTION>
INPUT button operations when [REMOTE] is selected in [CONTROL].
FUNCTION [DISABLE]
INPUT+FUNC.
[INPUT]
[FUNCTION]
[INPUT+FUNC.] Enables the <INPUT SELECT> and <FUNCTION> button
Displays GPI related menus.
0 to 126 Sets the ID number of the unit for communication using RS-485.
(Factory default
setting: 0)
Setting
The underlined values are the factory defaults.
Description
Enables front panel operation (including controls that use the GPI
function).
front panel operation is locked).
• Powering on/off, VOLUME operations, GPI control, and menu
display are available when the lock is engaged.
• Only the settings of the [CONTROL] and [LOCK ENABLE] menu
items can be changed when the lock is engaged.
• The rotary knob <PICTURE> is disabled when the lock is en-
gaged.
• Operation when the lock is engaged is in accordance with the
[LOCK ENABLE] setting.
• The mark is displayed in the operating status display, menu
display ([MAIN MENU] (main menu), [FUNCTION] menu, and
[INPUT SELECT] menu), [PICTURE] (picture adjustment) menu,
and function display screens when the lock is engaged.
MAIN MENU
MAEKER
VIDEO CONFIG
MEASURE SETUP
SYSTEM CONFIG
FUNCTION
AUDIO
Disables the <INPUT SELECT> and <FUNCTION> button
operations.
Enables the <INPUT SELECT> button operation.
Enables the <FUNCTION> button operation.
operations.
Enables and disables the GPI functions.
[DISABLE] Disables
Sets the PIN assignment of the GPI input connector.
The items that can be set are the same for each terminal.
(For details, refer to page 54)
Mark
Description
[ENABLE] Enables