Table of Contents
Advertisement
Detaching and Attaching the Stand
The stand is detachable.
• When detaching and attaching the stand, it is recommended that you place the unit flat on the edge of a desk or table with a soft
cloth or similar material spread underneath.
• The stand is specifically designed for this monitor and cannot be used with other monitors.
Detaching the Stand
Remove the stand mounting screws (four) using a Phillips
screwdriver.
• Store the detached stand and stand mounting screws in a safe
place for future use.
Stand mounting screws
Attaching the Stand
②
1.
Align the holes in the stand with those in the monitor.
2.
Use a Phillips screwdriver to secure the stand to the unit
with the stand mounting screws (four).
• Install the mounting screws in the order (A to D) shown in
the figure.
• When attaching the stand, tighten the stand mounting
screws to a tightening torque from 80 N·cm to 120 N·cm.
④
①
③
15
Advertisement
Table of Contents
