User Data; Saving User Data; Loading User Data - Panasonic BT-4LH310P Operating Instructions Manual

User Data

This unit can save up to five combinations of set values for MAIN MENU and screen adjustments made in the [PICTURE] (picture
adjustment) menu as user data that can be recalled.
You can also return set values and adjustments to their factory defaults.
User data includes the following settings.
• Menu settings except [SETUP LOAD]/[SETUP SAVE] and [REMOTE] in [CONTROL] (includes the function settings of the buttons
on the front panel of the unit)
• Screen adjustments made with the rotary knob <PICTURE>

Saving User Data

1.
Press <MENU> to display the main menu.
2.
Turn the rotary knob <PICTURE> to select the [SYSTEM
CONFIG] menu and press the rotary knob <PICTURE>.
3.
Turn the rotary knob <PICTURE> to select the [SETUP
SAVE] submenu and press the rotary knob <PICTURE>.
The setting values in the submenu can be changed.
INPUT NAME SETUP
SETUP LOAD
SETUP SAVE
POWER ON SETUP
POWER DOWN
POWER SAVE MODE
LED BRIGHT
CALIBRATION
4.
Turn the rotary knob <PICTURE> to select the setup to
save from [USER1] to [USER5] and press the rotary knob
<PICTURE>.
The following screen appears.
SETUP SAVE
USER2
YES
MENU EXIT SEL. ENTER
5.
Select [YES] and press the rotary knob <PICTURE>.
The user data is saved.
6.
To return to the previous screen, press <RETURN/VOL-
UME>.
22
FACTORY
USER2
LAST
OFF
OFF
HIGH
NO
RETURN RETURN

Loading User Data

1.
Press <MENU> to display the main menu.
2.
Turn the rotary knob <PICTURE> to select the [SYSTEM
CONFIG] menu and press the rotary knob <PICTURE>.
3.
Turn the rotary knob <PICTURE> to select the [SETUP
LOAD] submenu and press the rotary knob <PICTURE>.
The setting values in the submenu can be changed.
INPUT NAME SETUP
SETUP LOAD
SETUP SAVE
POWER ON SETUP
POWER DOWN
POWER SAVE MODE
LED BRIGHT
CALIBRATION
4.
Turn the rotary knob <PICTURE> to select the setup to
load from [USER1] to [USER5] and press the rotary knob
<PICTURE>.
The following screen appears.
• To return the settings to the factory defaults, select [FAC-
TORY].
SETUP LOAD
USER2
YES
MENU EXIT SEL. ENTER
5.
Select [YES] and press the rotary knob <PICTURE>.
The user data is loaded.
6.
To return to the previous screen, press <RETURN/VOL-
UME>.
• The selection items of [FACTORY] are [YES(ALL)],
[YES(EXCEPT USER)], and [NO].
YES(ALL): Initializes the data including USER
DATA
YES(EXCEPT USER): Initializes the data except USER
DATA.
*
1
USER DATA is the data you uploaded with the FILM
GAMMA and COLOR SPACE(LUT)items.
USER1
USER2
LAST
OFF
OFF
HIGH
NO
RETURN RETURN
.
*
1