Parts Supplied; Tools You Will Need; Installation Preparation - Danby DDW2405W Installation Instructions Manual

PARTS SUPPLIED:

• Two #8 Phillips flat head wood screws 5/8"
long to secure dishwasher to underside of
countertop. (Screws can be found inside the
literature package)
MATERIALS YOU WILL NEED: (Not included)
• Ferrule, compression nut and elbow
(3/8" NPT external thread on one end,
opposite end sized to fit water supply)
• Thread seal tape
• cUL Listed wire nuts (3)
• Air gap for drain hose, if required
• Waste tee for house plumbing, if applicable
• 48" Electrical cable (power supply)
• Screw type hose clamps
• Hand shut-off valve
• Water line; Stainless steel braided flex hose
• Coupler for extending drain line, if applicable

TOOLS YOU WILL NEED:

• Phillips Head Screwdriver
• 5/16" and 1/4" Nut-driver
• 6" Adjustable Wrench
• Level
• Carpenters Square
• Measuring Tape
• Safety Glasses
• Flashlight
• Bucket to Catch Water
(flushing the line)
• Gloves
• Tube Cutter
• Drill and appropriate bits
• Hole Saw Set

Installation Preparation

Air Gap
Phillips Head
Screwdriver
Flashlight
Bucket
Gloves
1
2 Wood Screws
Hand Shut-Off
Valve
90 Elbow,
Ferrule and
Compression
Nut
48" Electrical Cable
Waste Tee
Screw Type
Hose Clamps
1/4" & 5/16"
Nut-driver
6" Adjustable
Wrench
Safety Glasses
Hole Saw Set
Wire Nuts (3)
Thread Seal
Tape
72" Stainless Steel
Braided Flex Hose
Coupler
Level
Carpenters
Square
Tube Cutter
Measuring Tape
Drill & Bits