Display Settings - Chrysler 200 2012 User Manual

• Your radio has many features that add to the comfort and convenience of you and your
passengers. Some of these radio features should not be used when driving because they
take your eyes from the road or your attention from driving.
Clock Setting
• Turn the radio on, then touch the screen where the time is displayed.
• Touch the "USER CLOCK" soft-key (Navigation radio only).
• To adjust the hours, touch either the "HOUR FORWARD" or "HOUR BACKWARD"
soft-key.
• To adjust the minutes, touch either the "MINUTE FORWARD" or "MINUTE
BACKWARD" soft-key.
• To save the new time setting, touch the screen where the word "Save" is displayed.
Menu
• Press the "MENU" hard-key to access the System Setup menu and the My Files menu.
• Press the "MENU" hard-key in an active mode (SAT, CD, AUX, etc.) in order to change
mode specific settings.
Equalizer, Balance And Fade
Audio Control Menu
• Touch the "Equalizer" soft-key and use either the arrow soft-keys or the sliders on the
screen to adjust BASS, MID, and/or TREBLE.

Display Settings

• Select the "Nighttime Colors" soft-key to switch to manual nighttime mode and to adjust
the brightness of the display using nighttime colors.
ELECTRONICS
• Press the "AUDIO" hard-key on the right
side of the radio.
• Use either the arrow soft-keys or the
cross-hair on the screen to change
Balance and Fade. The "CENTER"
soft-key resets the settings.
• Press the "MENU" hard-key and touch
the "Display Settings" soft-key to access
the Display Settings menu.
• Select the "Daytime Colors" soft-key to
switch to manual daytime mode and to
adjust the brightness of the display using
daytime colors.
31