Radio Operation - Chrysler 200 2012 User Manual

ELECTRONICS
• Select the "Auto Color Mode" soft-key to switch to automatic daytime/nighttime mode
and to control the brightness of the display using the dimmer switch of the vehicle.
• Touch the "EXIT" soft-key to save your settings.

Radio Operation

• To access Radio Mode, touch the "RADIO" hard-key on the left side of the faceplate,
then touch the "AM," "FM" or "SAT" soft-key at the top of the screen to select the band.
Seek Up/Seek Down
• Press the "Seek Up" or "Seek Down" soft-keys to seek through radio stations in AM, FM,
or SAT bands. Hold either Seek to bypass stations without stopping.
Store Radio Presets
• Select the radio band by touching either the "AM," "FM," or "SAT" soft-key.
• Find the station to store by either pressing the "Seek Up" or "Seek Down" soft-keys,
touching the "SCAN" soft-key, or by using the "DIRECT TUNE" soft-key.
• Once the station is found, touch and hold one of the "PRESET" soft-keys in the list to the
right, until you hear a confirmation beep.
If the Presets are not visible on the right side of the screen, press the "Presets"
NOTE:
soft-key.
32