Switching Off; Cabinet Interior; Using The Freezer; To Start The Freezer And Set The Correct Temperature - Electrolux ER8313B Instruction Book

Hints:
· Distribute foodstuffs to allow cold air to
circulate freely between the products.
· Do not place food products directly against the
cooling plate on the rear wall since they may
freeze in this case.
· Also never put warm products into the cabinet.
Wait until they have cooled down.
· Cover all foods properly to avoid odours and
flavours from tainting other food.

Switching off

Turn the control anti-clockwise past the click
position to "H".
Unplug the power supply plug from the wall socket
or, alternatively, remove the fuse.

Cabinet interior

The shelves and door compartments are removable
and can easily be re-arranged.
Certain shelves must be lifted up by the rear edge to
enable them to be removed.
The lower door compartment and the glass shelf
above the vegetable drawer must not be moved.
They are required for proper air circulation inside the
cabinet.
Shelves with a raised edge should be placed with the
raised edge facing the rear wall of the cabinet, and
thus prevent food products from touching the
cooling plate.
The vegetable drawer has a removable plate to
separate different vegetables.
Hanging half-shelf
The half-shelf can be moved sideways. It can be
hung under all door shelves, except the lowest one.

Using the freezer

To start the freezer and set the
correct temperature
Turn the thermostat control to the desired position.
MIN The lowest position of the thermostat control
results in the highest temperature inside the cabinet.
MAX The highest position of the thermostat control
results in the lowest temperature inside the cabinet.
H : Switched off.
Allow the cabinet to run for a period of 24 hours
whenever the temperature setting is changed. This
will allow the temperature to stabilise inside the
cabinet.
5
GB
Electrolux 818 17 44-00/7