Table of Contents
Advertisement
• Sufficient technical knowledge for safely performing his
duties as specified in the manual.
F
CONTROL PANEL
F.1
Description of control panel
4
3
2
1
17
16
15
14
Auxiliary users on signalling icon
1
Defrost cycle activated signalling icon
2
G
INSTRUCTION FOR THE USER
G.1
Switching the appliance on
Connect the power cable to a power socket. The instrument
display performs a Lamp Test and the message OFF will
appear.
To activate and deactivate the appliance press the button
for 5 seconds.
The display will show the message ON (for activation) or OFF
(for deactivation).
Even if the machine is deactivated with the ON/OFF button it
still remains powered.
This button only disconnects the power to the loads connected
to the instrument.
G.2
Control panel buttons
• Humidity button
Present only in full door refrigerated models, it is used to set
3 different humidity levels.
Humidity varies on the base of the ambient temperature and
the cell temperature (Set point).
Depending on the humidity level, the display will show the
images with:
– 1 line (low humidity - 30%)
– 2 lines (medium humidity - 60%)
– 3 lines (high humidity - 90%)
Use the buttons
to select the most suitable humidity
level.
Table of categories, compartment temperature and
humidity setting
5
6
7
13
12
11
10
• Knowledge of the regulations on work hygiene and safety.
Compartment fans on signalling icon
3
Compressor on signalling icon
4
5
ON/OFF button
Door Open alarm signalling icon
6
High temperature alarm signalling icon
7
Low temperature alarm signalling icon
8
Assistance alarm signalling icon
9
10
Defrost/Down button
8
UP/Continuous Cycle button
11
9
12
Set button
light button
13
High/low humidity button
14
Programme selection button
15
History button
16
History function on signalling icon
17
1.
present in all full door and glass door freezer models and glass door
refrigerated models
2.
present only in full door refrigerated models
Categories
Fresh meat (beef,
mutton, pork)
Poultry
Fruit & Vegetables
Eggs, Butter,
Cheese,
Charcuterie
Fresh fish
Patisserie
Beverages
To confirm the degree of humidity selected, press the button
for 5 seconds.
• Up-Down buttons
Up for increasing the values;
Down for decreasing the values;
• Continuous cycle button
Press the button
Turbo Cooling "TC" cycle function (the message ccb=start
appears);
the temperature reinstatement function is activated, skip-
ping Defrost.
During the continuous cycle the compressor remains on;
the low temperature alarm is deactivated;
the message TC and the temperature value alternate on the
display.
1
2
Temperature
(℃)
4
-2
6
6
4
6
8
more than 5 seconds to activate the
Humidity
high
humidity
high
humidity
high
humidity
high
humidity
high
humidity
high
humidity
medium
humidity
11
Advertisement
Table of Contents
