Method To Connect Power Cord - LG LZ-H080GBA2 [ARVU053ZEA2] Installation Manual

Method to Connect Power Cord

1. Release two screws and then open
the cover of the control box.
•
With reference to the below wiring diagram,
accurately connect the main power cords into
the terminal block.
2. After inserting the power cord into the bushing,
fully insert it into the terminal block for connection.
• Fix the power cords with the clamp.
• Make sure that the power cords may not be removed by pulling them.
CAUTION
The Power cord connected to the unit should be selected according to the following specifications .
3. Wiring specifications
Wiring specifications
Length
External contact specifications
GND Power
(L1) (L2)
GN/YL BR BL
Sheathed wire(should be complied with IEC60245 standard)
NRTL recognized (UL, CSA, ETL ...)
MAX. 100m(109.4yd)
Normally closed contact (Current tolerance 10mA - 0.5A)
Cover of Control Box
Screw
Cord Clamp
Installation Manual 13
Installation