Table of Contents
Advertisement
How to connect power supply cord
1
Remove the front grille by pulling it out at the
bottom to release it, then lift it up along the unit
top front.
2
Remove cover by removing 2 screws from front.
3
Connect accessory power supply cord, and
attach power cord to base pan with screws.
* You need to attach ground wire to cover with a
ground screw.
ELECTRIC HEATER RATING
(CONFIGURATION BASED ON POWER CORD)
POWER
HEATER
VOLTAGE
CORD
WATTS
AYUH2315 230/208 V 2 000/1 650 W 9.2/8.4 A
AYUH2320 230/208 V 3 000/2 450 W 13.5/12.3 A
AYUH2330 230/208 V 5 000/4 000 W 22.1/20.2 A
MIN. CIR-
HEATER
MAX.
CUIT AM-
CURRENT
FUSE SIZE
PACITY
15 A
11.9 A
20 A
17.2 A
30 A
28.0 A
4
Replace cover with screws.
Tighten securely.
5
Slide the unit into the wall sleeve and secure
with 4 screws through the unit flange holes.
6
Reinstall the front grille by hooking the top over
the unit top, then pushing it in at the bottom.
INSTALLATION
11
Advertisement
Table of Contents
