Pentax KC-01 Operating Manual page 96

94
Selecting the Desired Focusing Area
You can set the range of the autofocusing area (AF area).
1
Select G in Step 3 on p.93, and press the 4 button.
The camera returns to the control panel.
2
Press the 3 button or the shutter release button
halfway.
The camera is ready to take a picture.
3
Press the 4 button.
The range of the selectable area is displayed with broken lines and a
4
white rectangle appears on it. You can set the AF area by changing the
position and size of this rectangle.
4
Select the AF area.
Available operations
Four-way controller (2345)
E-dial
d (G) button
5
Press the 4 button or the shutter release button
halfway.
The AF area is set.
The set AF area is saved in the memory even if the autofocus method is
changed or the camera is turned off.
Changes the position of the AF area.
Changes the size of the AF area.
Returns the AF area to the center.
OK OK
OK