Olympus FLUOVIEW FV1000 User Manual page 22

Preparation for Operation
LD405/440 laser power supply
II. PREPARATION For OPERATION
II. 1 - 2
Page
/ Turning the Power On
3.3 LD405/440 laser: FV10-LD405/440
Make sure that the provided shorting plug is attached
to the remote interlock
equipment and the interlock is released.
Set the power switch
Turn the key
Set the shutter switch
NOTE
or that is connected to your
to ON.
to the ON position.
OPEN.
The red lighting of the LASER EMISSION LED of
the LD405/440 laser power supply indicates that
the laser is oscillating. With a certain setup, the
laser beam is output by simply setting the shutter
switch to ON.