Initial Settings; Setting The Display Language - Pentax *istD Operating Manual

e_000_kb321.book Page 27 Wednesday, August 27, 2003 12:09 PM

Initial Settings

The first time the camera is turned on after purchasing, the "Initial Setting"
screen appears on the LCD monitor. Follow the procedure below to set the
language displayed on the LCD monitor and the current date and time.
Once setting is done, these will not need to be set again when turning your
camera on.

Setting the Display Language

You can choose the language in which the menus, error messages, etc.
are displayed from the following: English, French, German, Spanish,
Italian and Japanese.
1
Turn the camera on.
2
Use the four-way controller (45) to select your applicable
language.
The default setting is English.
3
Press the four-way controller (3).
The screen for setting the [City] will be displayed.
You can change the setting after it has been made. Refer to "Setting the Display
Language" p.27.
Initial setting
En g lish
City
DST
Video Out
: Ok
OK
27
2
NYC
NTSC